Choosing a peanut oil press in Sudan starts with your business model, not the machine

Decide first

Three Sudan business models and what each one needs

Pressing process01:26

Peanut hydraulic pressing process clip

Use this clip to understand hot pressing, barrel loading, hydraulic pressing, and oil discharge rhythm.

Post-press handoff

Confirm crude oil and cake routing together

Filtration, storage, and cake collection after pressing directly affect layout and quotation scope.

Direct advice

What to choose for a Sudan peanut project

• If your Sudan project is a shop or fresh-oil retail business, choose a small Korean-type or compact hydraulic model.
• If it is a premium batch factory — the most common path for Sudan groundnut — choose the 325 hydraulic press.
• If it is a large continuous line for bulk commodity oil, a screw/expeller press fits better than hydraulic.
• Shelling and aflatoxin control on incoming kernels decide oil grade and food-safety compliance more than press tonnage.

Around the press

The line is more than the press — match the supporting modules

• Shelling and cleaning come first if the project starts from pods rather than prepared kernels.
• A roaster sets aroma for traditional hot groundnut oil; skip it only for the cold, light-color premium route.
• Settling tanks and a plate-frame filter (200-300 mesh) give the clean oil that branded and export customers expect.
• Plan groundnut cake handling — protein-rich cake is a real second income stream for feed or food use.

Project boundary

What to confirm before scoping Hydraulic Peanut Oil Press in Sudan: Selection Guide for Shop, Batch, and Export Projects

Hydraulic Peanut Oil Press in Sudan: Selection Guide for Shop, Batch, and Export Projects should not be quoted from an equipment name alone. Check feed lots, target oil, post-press handling, and packing rhythm in one scope before deciding which Peanut Oil Press modules stay. Listed on the factory hot-press page — discuss 300/325 first.

When feed condition, moisture, impurities, batch weight, and product position are unclear, press tonnage and filter area become guesswork. Factory systems share 60 MPa and 2.2 kW motors; hot pure press is 30–40 min/barrel and cold pure press is ~2 h/barrel — cycle time matters more than brochure tonnage.

• Confirm whether feed is whole seed, kernels, pretreated material, or an existing semi-finished stream.
• Confirm whether the target is crude oil, filtered oil, bottled oil, drum ingredient oil, or a refining handoff.
• Hot cycle reference: pure press 30-40 min/barrel, ~1.5 h for 2 barrels with loading; cold pure press ~2 h/barrel, ~4.5 h for 2 barrels.
• Confirm batch rhythm, labor, changeover, retained samples, power (often 380V/50Hz/3ph), and site install conditions.

Factory model check

Match hot / cold models to factory hard data

When discussing Hydraulic Peanut Oil Press in Sudan: Selection Guide for Shop, Batch, and Export Projects, pin models to published factory specs — not tonnage alone.

Hot 300/325: 300–325 ton, 60 MPa system, standard barrel Ø390×800 mm / max 100 kg, pure press 30–40 min/barrel, ~1.5 h for 2 barrels with loading, 2.2 kW motor. Cold 355/400/426/480/500: 370–630 ton, integrated frame, same 100 kg standard barrel, pure press ~2 h/barrel, ~4.5 h for 2 barrels with loading; optional Ø300 high-pressure barrel max 60 kg. Residual oil target ~≤5% (peanut hot often 6–8% measured).

• Standard barrel Ø390×800 mm, max ~100 kg crushed feed; optional Ø300 high-pressure barrel max ~60 kg.
• Cylinder material 27SiMn; cold frames are integrated molded steel; hot frames are typically H-type channel steel.
• Listed on the factory hot-press page — discuss 300/325 first.

Equipment check

By Country needs to land in equipment interfaces

After Hydraulic Peanut Oil Press in Sudan: Selection Guide for Shop, Batch, and Export Projects is clear, write the interfaces: how preparation feeds the press, how oil leaves the press, how filtration connects to tanks, and how packing receives finished oil.